Skip to main content

Filter By:

Electronics

$244.99
The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected). - Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series - Li-Ion type - Capacity: 500 mAH |3.7Wh (± 2000km autonomy) - Rated voltage: 7.4V - Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately) - Fixing small parts included - Weight: 52g
$703.99
- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB
$54.99
Convenience is calling. Answer! This bag is a must for anyone with a phone. So, everyone. Sized so your phone will stay secure even on your bumpiest rides. Keep you and your phone safe while riding. - Clear touchscreen-compatible pocket fits phones up to 6.5-inches (16.5cm) - Velcro attachment to top tube - Cargo capacity: 30.5 cu in (0.5L) - Dimensions: 16cm (l) x 8cm (w) x7cm (h) - Attachment: Hook and loop strap - Fiber content: 100% Polyester
$59.99
Convenience is calling. Answer! This bag is a must for anyone with a phone. So, everyone. Sized so your phone will stay secure even on your bumpiest rides. Keep you and your phone safe while riding. - Clear touchscreen-compatible pocket fits phones up to 6.5-inches (16.5cm) - Velcro attachment to top tube - Cargo capacity: 30.5 cu in (0.5L) - Dimensions: 16cm (l) x 8cm (w) x7cm (h) - Attachment: Hook and loop strap - Fiber content: 100% Polyester
$54.99
Convenience is calling. Answer! This bag is a must for anyone with a phone. So, everyone. Sized so your phone will stay secure even on your bumpiest rides. Keep you and your phone safe while riding. - Clear touchscreen-compatible pocket fits phones up to 6.5-inches (16.5cm) - Velcro attachment to top tube - Cargo capacity: 30.5 cu in (0.5L) - Dimensions: 16cm (l) x 8cm (w) x7cm (h) - Attachment: Hook and loop strap - Fiber content: 100% Polyester
$54.99
Convenience is calling. Answer! This bag is a must for anyone with a phone. So, everyone. Sized so your phone will stay secure even on your bumpiest rides. Keep you and your phone safe while riding. - Clear touch screen-compatible pocket fits phones up to 6.5" (16.5cm) - Velcro attachment to top tube
$99.99
Train smarter by connecting heart and smart phone or computer, all from a comfortable wearable with an easy-on washable strap. Key features: - Washable heart rate strap comfortably conforms to body - ANT+ 2.4 GHz and Bluetooth Smart wireless digital heart rate sensor - ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone - For use with all ANT+ and Bluetooth Smart wireless technology enabled devices - Includes washable softstrap, heart rate sensor, and CR2032 battery - Visit thisisant.com for a complete list of compatible devices - Visit bluetooth.com for a complete list of compatible devices - Not for underwater use
$25.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin High Mount for a clean, flush look that securely holds your Garmin centered over the stem. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
$12.99
Light up the road Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. - Blendr is an elegant, integrated accessory mounting solution - Clip can be rotated for compatibility with many Bontrager accessories - Works with any Blendr-compatible stem and the accompanying base
$7.99
Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor
$69.99 $99.99 30% Off
Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs. • ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery • Works with Trek DuoTrap compatible bikes
$4.99
Replacement chainstay cover for DuoTrap S Digital Sensor
$8.99
Genuine Bontrager cycling computer mounting accessories and replacement parts. - Ensure your computer stays properly in place. Replacement adapter for the Insta-Mount system - Universal mount permanently attaches to the back of your phone or other device - Use with Bontrager Trip mount for seamless Blendr capability
$99.99
Get more data from your rides with the Bontrager Interchange digital combo speed and cadence sensor. This ANT+ 2.4 Ghz is designed to work with Bontrager Node wireless computers. It also works with many other ANT+ enabled devices. Sensor adjustment is easy with the adjustable arm. • ANT+ 2.4 Ghz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Independently adjustable arm for precise alignment of speed and cadence sensors • Includes Bontrager wheel magnet and crank cadence band • Includes silicone mounting strap to fit most chainstays and CR2032 battery • Visit www.thisisant.com/directory/ for compatible ANT+ devices • Visit www.bluetooth.com/pages/bluetooth-smart-devices.aspx for compatible Bluetooth devices
$84.99
A simple, user-friendly cycling computer that displays speed, distance, and even calories burned. The Bontrager RIDEtime Computer gives you the ride metrics that matter most in a sleek, user-friendly package. A large, easy-to-read screen makes it simple to track your speed, time, and distance, and more! Product details - Intuitive one-button control with hands-free scroll mode - 2" screen size with easy-to-read digital display - Trek Certified Service reminders based on selected bicycle type - Key features include speed (current, avg., max.), distance (trip, total), time (clock, timer), and calories burned - Sensor includes magnet guidelines to simplify setup and installation - Includes mount, analog sensor, CR 2032 battery, and wheel speed magnet
$69.99 $99.99 30% Off
An elegant ANT+ cycling computer that’s simple to set up, intuitive to operate, and has a large, easy-to-read screen. Know your ride Change the way you ride with the RIDEtime Elite Cycling Computer. It's easy to pair with compatible ANT+ sensors for real-time speed, cadence, and power data so you can target more productive workouts and better recovery rides. Simple setup and an intuitive one-button interface get you riding faster, while features such as auto start/stop and auto light control help you take charge of your ride. Product details - 2” easy-to-read screen features a programmable backlight and customizable tri-field display - Features auto start/stop, auto clear, and auto light control with customizable hands-free scan modes - Tri-field display lets you see three functions at once (speed, cadence, heart rate, power) - Displays Trek Certified Service reminders based on your selected bicycle type - Displays distance (trip/total), time (clock, timer), and calories burned - Track your speed, heart rate, power, cadence (current, average, max) - Includes sleek out-front mount and is also Blendr compatible - Requires ANT+ compatible sensor such as DuoTrap S or Interchange Combo Sensor - Battery: CR2032 (Coin) - Weight: 40g
$9.99
Genuine Bontrager cycling computer mounting accessories and replacement parts. - Ensure your Bontrager cycling computer properly stays in place. - Compatible with RIDEtime, Trip 100, 200, and 300 computers. - One size fits all.
Page 1 of 1