Other

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

- 200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals, Charger 2 sealhead,DebonAir seals)—Lyrik B1/Pike 29+ (2018+)

Eliminate dropped chains forever with the new OneUp Components Bash Guide. As the trend for lower and slacker bikes continues, chainring protection is becoming even more important. Revised for 2019 the OneUp Bash Guide uses simple, one tool installation and adjustment as well as an all new tool less flip The OneUp Bash Guide was developed with input from top EWS World racers and can be seen all over this years circuit. Reinforced Nylon bash guards and a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the OneUp Bash Guide can handle the biggest hits, but at a weight of only 105g (34T) you may forget it’s even there. NOT JUST FOR ENDURO RACERS. The OneUp Bash Guide is equally at home on your trail bike, where the extra bash protection is a must for aggressive riders or on your DH rig. With the popularity of clutch derailleurs, it is no longer necessary to run a chain guide with a lower roller to effectively tension your chain. DH racers and Bike Park rippers will appreciate the huge reduction in drag with the elimination of the lower roller, without sacrificing any strength or chain retention. The OneUp Bash Guide includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. FEATURES - Tool less upper guide flip - Install without removing your crank - Single tool install and adjustment - Boost compatible - Oval Compatible - Black Stainless Steel hardware - Includes 3 bash plates (28-30T, 32-34T, 36T) - Patented US 10,053,188 Other Patents Pending SPECS - Weight: 90g 28-30T, 105g 32-34T, 110g 36T - Capacity: 28-36T - Chainline: 7.5mm adjustment - Mount: ISCG05 - Color: Black top guide piece included - Material: 7075 aluminum, top guide glass reinforced thermoplastic

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals, Chgr2.1 damper sealhead, DB air spring sealhead) - Lyrik C2/Pike B3 Sel+ and Ult (2020)

Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility

Fit Kit SET704 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle. This kit includes: - 15 x 155 mm thru axle with M14 x 1.5 mm thread pitch to fit Fox Boost forks (may fit others as well) - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm

DebonAir air spring assembly to update Pike and Revelation forks.

UPGRADE ANY DROPPER The V3 Dropper Remote is a lighter action remote with a replaceable rubber thumb pad and integrated cable port. Available in 7 colours, all major clamp standards and as a remote only option so you can reuse your existing V2 clamp. It's the easiest way to upgrade any mechanical dropper. REPLACEABLE RUBBER THUMB PAD A grippy rubber thumb pad improves lever feel and can be colour matched to your bike. The integrated cable port with cut marks makes installing your remote even easier. It also keeps your cable end tidy and lets you install without a cable crimp for a super clean look. LIGHTER ACTION DESIGN The new lever cam reduces the thumb force needed to actuate your dropper post. It requires 27% less actuation force than our V2 remote. Upgrading your remote is a quick and easy way to improve the feel of any mechanical dropper post for less than $50. EASY INSTALL The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. The integrated cable port includes cut marks that take the guess work out of cutting your cable and lets you tuck the cable away for you a super clean look. Compatible with all cable actuated dropper posts. KIT INCLUDES 1 Remote body 1 black thumb cushion Cable, housing, cable end & barrel end

- Lever Internals Gen 2 Guide RSC/Ultimate|Code RSC Qty 1

GX Eagle Rear Derailleur Pulley Kit

Seal kits for DVO suspension forks. - Fits Onyx DC and SC forks

Fox Dust Wiper Kit is standard equipment on Fox Forks and give them a smooth feel.

Genuine replacement parts Get back on the trail with a quality replacement hanger. Don't be left hanging. - Attachment hardware is sold separately - Compatible with Superfly SS 2015-2016 (142x12mm OLD) - Compatible with Stache 29+ 2016-2022 (148x12mm OLD) - Compatible with 1120 2018-2022 (148x12mm OLD) - Compatible with Farley 2016-2022 (197x12mm OLD)

- Lever Internals Gen 2 Guide R/RE/DB5|Code R Qty 1

- Lever Internals Gen 2 Level Ultimate/TLM/TL Qty 1

The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes. KIT INCLUDES - EDC TOP CAP - EDC steerer plug - 2x 1mm, 3mm, & 5mm Headset Spacers

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

- Adapter allowing the installation of an IS 6-bolts disc on a hub using the Shimano Center Lock system - Compatible only with rotors that feature a steel spider (i.e. a steel mounting point, Not compatible with SM-RT76 / SM-RT86)

Genuine replacement parts Get your bike back on the trail with the derailleur hanger you need. - Universal Derailleur Hanger - or UDH - offers greater derailleur protection - Designed to rotate rearward in event of an impact - Compatible with all drivetrains - 25mm washer is standard on hardtails - Included attachment hardware is reverse-threaded Specs - Size: Rear drive side, Thru Axle - Mounting location: Rear drive side - Rear Dropout Dimension: Thru Axle - Attachment: Thru axle nut

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 1-bolt

- Install this in line to your shift housing for precise tension adjustments - Compatible with all 4mm shift housing - Allows for 3.5mm of adjustability - Indexed movement prevents any accidental or unintentional adjustments - Compact design only adds 14mm to housing length

Keep your seatpost right where you left it. Upgrade to a quick release seatpost clamp for easy seat height adjustments. - Follow laser-etched torque listing on collar

These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars. - Required for bar end use on Satellite Plus Isozone bars - For use with clamp style bar ends - Includes 2 adapters and 2 rubber handlebar inserts. - Bar end sold separately

V2 dropper remote clamp for 22.2mm handlebar.

Replacement dropper post remote clamp. Can be used to convert existing clamp on the OneUp Dropper Remote. - Compatible with Shimano I-Spec EV (M9100, M8100, M7100) brake mounts. - Does not contain remote body.

Replacement dropper post remote clamp. Can be used to convert existing clamp on the OneUp Dropper Remote. - Compatible with SRAM MatchMakerX (MMX) or Shimano I-Spec EV (M9100) brake mounts. - Does not contain remote body.