Accessories

The Dynaplug Racer Pro improves upon the legendary Racer's original design with Twin Tube technology. This allows you to store x4 pre-loaded plugs ready to go in a single tool. Snap-on caps protect plugs from dirt and damage. When your ready to make a repair, just pop off a cap to deploy either a standard size plug (with wheel-friendly soft brass tip) or the aluminum Megaplug for mega-big punctures. If you need more plugs just unthread the Twin Tube and flip it around for more plugging action! Machined in Chico, CA from US-made billet aluminum and stainless steel, the Racer Pro weighs 26g, only 2g more than the prior generation, yet delivers twice the puncture-defeating power! What's in the box: x1—Dynaplug Racer Pro Tool x1—Megaplug plug x3—Standard Plugs x1—Standard Twin Tube x1—Standard/Megaplug Twin Tube

- RockShox, 11.4118.038.002, Service kit, Monarch Plus B1 2014+

- 200 hour / 1 year service kit for Super Deluxe RT3 A1 rear shocks - Includes air can seals, piston seal, glide rings, IFP seals, reservoir seals

Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.

Our Sport Hydration Drink Mix was created for a simple purpose—to replace the electrolytes lost in sweat and to provide a little bit of energy when working out, without offending your palate or gut. We initially created this drink because some of the world's best athletes needed better. Conventional sports drinks made them sick. They were undrinkable—too sweet, over-flavored, and didn't even replace what was lost in sweat—which defeated the whole purpose, like fighting thirst with more thirst. The best athletes needed something to safely hydrate, something to quench their thirst, and something to help them perform better. So with their help, we reimagined sports drinks, stripping down what used to be a neon-colored carnival to its bare essentials. In the process, we learned that simple wasn't just better for elite athletes, it was better for everyone who works hard and sweats. The result is a sports drink with minimal sugar (4g per 100 ml) and a ratio of sugar (glucose + fructose) that is optimized for faster absorption, an electrolyte profile that actually matches what is lost in sweat (800 mg sodium, 80 mg potassium, 100 mg calcium, and 80 mg of magnesium per liter), and only real fruit for flavor for a light and refreshing taste that you can drink all day. That's it—less sugar, the right electrolyte profile, and real fruit. So, if you've never met a sports drink you wanted to take home, your luck is about to change. Drink when thirsty and leaking like a busted fire hydrant. Don't drink while deep in the middle of a Netflix marathon session or sending emails (unless, you're also on your trainer). Meaning, if you haven't earned it, you don't deserve it.

An elegant ANT+ cycling computer that’s simple to set up, intuitive to operate, and has a large, easy-to-read screen. Know your ride Change the way you ride with the RIDEtime Elite Cycling Computer. It's easy to pair with compatible ANT+ sensors for real-time speed, cadence, and power data so you can target more productive workouts and better recovery rides. Simple setup and an intuitive one-button interface get you riding faster, while features such as auto start/stop and auto light control help you take charge of your ride. Product details - 2” easy-to-read screen features a programmable backlight and customizable tri-field display - Features auto start/stop, auto clear, and auto light control with customizable hands-free scan modes - Tri-field display lets you see three functions at once (speed, cadence, heart rate, power) - Displays Trek Certified Service reminders based on your selected bicycle type - Displays distance (trip/total), time (clock, timer), and calories burned - Track your speed, heart rate, power, cadence (current, average, max) - Includes sleek out-front mount and is also Blendr compatible - Requires ANT+ compatible sensor such as DuoTrap S or Interchange Combo Sensor - Battery: CR2032 (Coin) - Weight: 40g

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Grid Front and Rear Lights have four mode options, you can choose if you need high lumen power or extended run time. A complete set ready for those commuting in the city, riding the open roads, or heading to their local trail. The Grid Light Set offers plenty of rechargeable power to keep you visible while out riding. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C-Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tell you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

A compact, efficient way to hold flat fixing essentials so you can get back on the bike quickly. The Pro Flat Pack has everything you need to fix a flat and get back on the bike quickly in an aero, easy to grab package. This all-in-one kit provides essential items needed to fix a flat tire with additional pockets for money and ID, plus extra soft, padded materials to ensure you won't be bothered by the poke of a tool while it's stashed in your back pocket. - Tight fitting, stretch neoprene material zips open for easy access - All the items you need to fix a flat tire - Includes Air Rush Elite, CO2‚ inflator, two 16g CO2‚ cartridges, and a padded bag - Reusable hand insulation sleeve, vulcanizing patch kit - Room in the bag for ID, money, keys, and more

Add fenders to your bike to show mud and debris who's boss. Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Accessorize your ride with some fenders and keep yourself dry while you're at it. From subtle to chic, there's a pair for everyone. Product details: - Includes front and rear full-length fenders - Designed for use on Cruiser Go! and Townie Go! 7D e-bike models - Protects against pesky mud and splashes - Will not fit on other bike models - Compatible with Electra light kit - Mounting hardware included - Mounting location: Front and Rear - Attachment: Bolt-on - Material: Aluminum

Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.

Keep your must-have accessories within reach for the ride ahead with an easy-to-access Trek Adventure Top Tube Bag. Your ride essentials, at your fingertips The Trek Top Tube Bag lets you keep everything you need right next to your handlebars, so you can pack smarter and smaller. With secure mounting, internal pockets, and durable materials, you can safely store your favorite riding accessories — and access them at a moment's notice. PRODUCT DETAILS - Includes mounting hardware for bikes with two integrated mounts on the top tube and straps to fit on any bike - Designed with durable, lightweight Ultragrid™ Ripstop material made from recycled pre-consumer nylon - The interior lining is made from recycled plastic bottles for a more sustainable ride - Internal pocket help keep your gear organized and secure on even the bumpiest of routes - Water-resistant construction helps keep your gear safe and dry

A simple, user-friendly cycling computer that displays speed, distance, and even calories burned. The Bontrager RIDEtime Computer gives you the ride metrics that matter most in a sleek, user-friendly package. A large, easy-to-read screen makes it simple to track your speed, time, and distance, and more! Product details - Intuitive one-button control with hands-free scroll mode - 2" screen size with easy-to-read digital display - Trek Certified Service reminders based on selected bicycle type - Key features include speed (current, avg., max.), distance (trip, total), time (clock, timer), and calories burned - Sensor includes magnet guidelines to simplify setup and installation - Includes mount, analog sensor, CR 2032 battery, and wheel speed magnet

For the perfect pressure A shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed off so you can easily adjust your shock pressure. The perfect pressure takes precision. The Bontrager Shock Pump features a large, easy-to-read gauge for accurate readings, a bleed valve for pinpoint accuracy, and a thread-on design that quickly attaches to front and rear suspension shocks for a reliable, secure connection. - Easy-to-read gauge that is accurate to 400 PSI - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks

Kryptonite's Keeper 12 U-Lock is like a tough nut: you just can't crack it. Thanks to the 12mm hardened steel shackle that resists cutting and leverage attacks, you get peace-of-mind while you run into the grocery store or lock up outside the coffee shop. The shackle connects to the disc-style cylinder for exceptional security, and it all sits in the click-style transportation bracket so it stays stable during transport. To top it all off, you get a reinforced collar over the keyway for added protection. Specifications & Features - 12mm HARDENED STEEL SHACKLE resist hand tools - Reinforced collar over keyway for increased protection - HIGH SECURITY DISC-CYLINDER - Includes click style TRANSPORTATION BRACKET - High security BENT FOOT DESIGN for ease of use - Protective vinyl covering - Key Safe Program

Rack 'em up Turn your bike into a trusty pack mule with this sturdy rear rack. The BackRack Disc is designed to mount to the eyelets already built into your frame, so installation is easy. It has MIK compatibility so you can securely mount compatible trunk bags or accessories in seconds, plus integrated threaded accessory eyelets for added functionality and effortless light installation. Product details - Quick and easy install adds storage and utility to compatible bikes - MIK mounting system provides secure, integrated mounting with compatible bags - Integrated eyelets make it easy to mount lights or other accessories - Compatible with MIK, standard trunk bags or panniers - Single-bolt strut mounts allow maximum adjustment and easy installation - Includes required mounting hardware and spacer to fit most disc brake calipers - Max weight capacity 25kg (55 lbs.) Specifications - Size: Small 13-18" (33-52cm); Large 18-22" (54-62cm) - Rack type: Rear racks - Material: Aluminum

Finish Line's Shop Quality Chain Cleaner Kit is quick, efficient and easy to use. With it, you never have to remove your chain to keep it clean. Its triple rotating brushes and scrubber pads provide fast, thorough cleaning. Your hands stay clean, too! Plus, its rugged plastic construction is virtually unbreakable and the kit comes complete with a 4-ounce bottle of EcoTech Degreaser concentrate and a 2-ounce bottle of Dry lube. Use it for a cleaner and smoother-shifting chain.

Our Sport Superfuel Drink Mix was created for athletes who push so hard that they can't easily take in enough calories to perform at their best. For years, we've preached fueling with real food, like our famous rice cakes or Anytime Energy Bars. Why? Because traditional fueling gels and drinks use carbohydrates that break down too fast to tolerate, causing gastrointestinal distress. But, we get it—you can't always make or carry real food—you want power in a bottle. We've discovered the answer in a better carbohydrate (with a funny name) that digests steadily like real food does: Cluster Dextrin. One serving of Superfuel gives you 400 calories, powered by Cluster Dextrin, plus the electrolytes lost in sweat to fuel and hydrate your biggest days. We've tested this product for over 20 months with the world's greatest athletes, including Gold Medalist Triathlete Gwen Jorgensen and the EF Education First Pro Cycling team. It has allowed these athletes to drink their fuel on some of the longest and most intense events in the world when they can't eat real food without causing gastrointestinal distress. Use it when there's no time to chew. NON-GMO, GLUTEN FREE, DAIRY FREE, KOSHER, VEGAN

Charge, Click, Go Bright And Easy Batteries, what a hassle. This small-but-mighty safety light set is rechargeable, so you’ll never have to change batteries again. Just charge with the micro-USB cable and attach using the handy silicone mounts. Then click once for power, and traffic can see you! - High 60 lumen - High 20 lumen - Versatile Silicone Mounting System - Waterproof To IP-65 Standard. - 3 Hour Recharge Time.

A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base. Fresh air for your tires Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy-to-read 3-inch base-mounted gauge - Max pressure 160 psi (11bar)

Best In Class You're never more than an arm's reach from your smartphone, and Delta's bicycle phone mount provides convenient and visible placement for your phone. With your phone securely mounted to your stem OR handlebar, with multiple options available, you can use navigation apps to reach your destination and always stay connected to loved ones with proprietary access to Face ID and Touch ID for new generation devices. Features Secure Display - Built-in locking mechanism ensures your mobile phone is securely held and mounted to your bicycle yet is adjustable for convenient display while riding. Multiple Mounting Options - Included handlebar and stem cap mounts allow you to position your phone in your desired location, suitable for every bike. Includes additional ElastoMount to connect to any bar and for quick on/off. Secures to handlebar diameters up to 1 3/8"/35 mm Accessible - Stretch fit design provides easy in & out access to your device—spend more time riding and less time fumbling during an important call or when a change of route is needed. Trusted Quality - Integrated silicone bumpers protect your mobile device from scratches and reduce vibration while riding. Don't let rough patches or bumps deter you from your adventurous ride. Weight - 0.24 lbs / 110 grams

Convenience is calling. Answer! This bag is a must for anyone with a phone. So, everyone. Sized so your phone will stay secure even on your bumpiest rides. Keep you and your phone safe while riding. - Clear touchscreen-compatible pocket fits phones up to 6.5-inches (16.5cm) - Velcro attachment to top tube - Cargo capacity: 30.5 cu in (0.5L) - Dimensions: 16cm (l) x 8cm (w) x7cm (h) - Attachment: Hook and loop strap - Fiber content: 100% Polyester

This bike basket was designed to make two things extremely easy: reducing waste in our oceans while carrying your books, blanket or BBQ sandwich. - Made using 1 pound of reclaimed ocean plastic - Attaches via snap-on bracket - Easily remove to carry your stuff off two wheels - 27 liters of carrying capacity Specifications: - Dimensions: 44.5cm (l) x 18cm (w) x 34.3cm (h) - Basket type: Front or rear basket - Weight capacity: 11 lbs (5 kg) - Attachment: Hook and loop strap - Includes hardware - Material Ocean Recycled Plastic (ORP) - Weight: 600g

The included 9 function Multi Tool contains your most used tools and is designed to live inside your stem/steerer tube. Never get stuck without a Multi Tool on a ride ever again. - 2, 2.5, 3, 4, 5, 6, 8mm - T25 Torx - Flat Head Screwdriver - A stripped down version of the EDC tool containing a 9 function multi-tool neatly stored in your steerer tube - Very easy to install without removing your star nut or threading your steerer tube

The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.

With 2 LEDs pumping out 65 lumens of power, 270 degrees of visibility, and Blackburn's unique BLITZ daytime running mode, the DAYBLAZER 65 is focused on safety, so you can focus on your ride. Also, because of the narrow profile of our unique mounting bracket, the DAYBLAZER 65 tail light can be mounted to just about anything you can think of from round or aero seat posts, to seat stays, to a rear rack, or your back pack - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-67 standard - TIR Lenses - LED Fuel Gauge/Charge Indicator - Polycarbonite Construction - 2 hour recharge time - Runtime: Solid 1.6hrs (50 lumen), High Flash/Low Strobe 3hrs (65 lumen)/6hrs (35 lumen) - 48g

Blackburn's Outpost Corner Bag is a handy, rigid pouch that'll fit into that odd space behind your head tube for storing a CO2, tube and tools. Every hardtail and even the raddest of full-suspension bikes has an unused space behind the head tube that it's not using. We've commandeered that space on your behalf. Nothing to rattle against your seatpost and nothing for your tire to buzz on. Carry (nearly) anything. Hook and loop straps and daisy-chain loops let you fit the bag securely. A separate internal mesh pocket for your tube and loops for your CO2 keep the contents tidy. With a tube, tool and air within reach and a bottle on your bike, who needs a backpack? - Includes 6 hook-and-loop straps, 7" and 10" - Weight: 130 grams

Convenience is calling. Answer! This bag is a must for anyone with a phone. So, everyone. Sized so your phone will stay secure even on your bumpiest rides. Keep you and your phone safe while riding. - Clear touchscreen-compatible pocket fits phones up to 6.5-inches (16.5cm) - Velcro attachment to top tube - Cargo capacity: 30.5 cu in (0.5L) - Dimensions: 16cm (l) x 8cm (w) x7cm (h) - Attachment: Hook and loop strap - Fiber content: 100% Polyester

Convenience is calling. Answer! This bag is a must for anyone with a phone. So, everyone. Sized so your phone will stay secure even on your bumpiest rides. Keep you and your phone safe while riding. - Clear touch screen-compatible pocket fits phones up to 6.5" (16.5cm) - Velcro attachment to top tube

- Easy-Click Locking - Ergonomic dials for ease of use - New easy to use reset design - Included bracket to easily carry on a bike (-03, -06)

- Easy-click locking, no need for keys when locking - 2 reversible keys, can be inserted either way - Included bracket to easily carry on a bike (-01, -03, -07) - Coiled and compact for easy transportation (-02, -05, -06)

This basket is as sweet as honey. It's perfect for holding all your things, large and small. Easily attach and remove this MIK basket from your rear rack for added functionality and fun. You have things. We have things to hold those things. - Compatible with MIK rear racks / MIK adapter plate installed - Proprietary Electra design - Honeycomb patterned stamp - Powder-coated steel - Carries up to 9kg (20lb) - Dimensions: 34cm (l) x 23cm (w) x 27.5cm (h) - Attachment: MIK - Includes hardware: Yes - Weight: 1.02kg

Why has no one invented a multitool that removes a chain quick link? Oh wait, Blackburn has. The Tradesman Multi-Tool has all the hex and Torx keys you're ever going to need in a portable tool, with the addition of a disc pad spreader and a tool that'll remove the most stubborn split chain links. - 18 functions - Quick link storage - Tools include: T25, T30, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm allens, disc brake pad spreader, flathead screwdriver and quick link chain tool compatible with 12 speed and fewer gears - 0.30lbs

- Steel handlebar basket - PVC coated - Equipped with a quick release mounting bracket - 33.5 x 25 x 26cm

The EDC PLUG & PLIERS KIT is the perfect addition to the EDC tool system. The tire plug Jabber Tool threads directly into the EDC carrier (SOLD SEPARATELY). The new Quick Link Breaker Pliers are compatible with all 10,11, and 12 speed quick links chains. Both new tools and bacon strips store perfectly within the EDC capsule ready for race day deployment. - Perfect addition to the EDC tool system - Kit includes: Quick Link Breaker Pliers (10-12 spd chains)Tire Plug Jabber Tool and 15 Bacon Strips - Both tools and bacon strips store perfectly within the Stash Capsule of 100cc pump and steerer tube setup

The KryptoFlex 1007 Double Loop Cable is a 3/8-inch braided steel cable providing increased cut resistance. The double loops are for use with U-locks, disc locks and padlocks (sold separately). The vinyl coating protects bikes and equipment from scratches. It includes the Hook-n-Loop strap for easy carrying. The KryptoFlex 1007 Looped Cable is 3/8-inch x 7-feet.

Keep an eye on your speed, distance and more with wireless ease when Bontrager's GOTime cycling computer is clipped to your bars. Set-up is a breeze; the large LCD screen is easy to read and the integrated clip mount allows you to instantly remove the computer and throw it in your pocket when you reach your destination.

- Ultra-heavy-duty construction - Fits nutted rear axles - Adjustable to fit 12" - 20" wheels - 100lb weight capacity - For use on single speed bikes

The Easy-Pro Brush Set includes 5 different brushes that make easy work of all bike-cleaning jobs. Use them to remove mud, dirt and road grime from your frame and components. The package comes with a features-and-benefits guide that explains the multiple uses of each brush. Also included is a chain for hanging the brushes when they're not in use.

The Bastion 1.4 L's quick release mounting hardware provides convenience and peace of mind by making removal and attachment easy. Should there be rain in the forecast, the Bastion 1.4 L's expandable size will easily accommodate a packable rain shell. - Dimensions: 10 x 11 x 15 cm - Volume: 1 1.4 L - Weight: 225 g - Robust 600D Korean Polyester fabric - Expandable bellows design - Ideal for tools, tube, repair kit, mini pump, etc. - LED Light mount - Rixen and Kaul KLICKfix Saddle Adapter - Reflective elements - Weather resistant - Limited lifetime warranty

Essential for your off-road adventures, this pump produces a hurricane-force air blast with its high-volume barrel. The oversized design, made from strong and lightweight aluminum, delivers more air per stroke so you can get back on the trail quickly. Details: - AnyValve pump head automatically adapts to Presta, Schrader, and Dunlop valves - Rebuildable internal parts available - Tough, lightweight aluminum barrel - Rubberized folding T-handle - Bike mount included - 90 PSI, 6.2 Bar maximum - 145g / 0.32lb

- Makes your bike shine like new and keeps it that way. - Biodegradable formula cleans, polishes, and protects in one step. - Also great for dropper posts, suspension, and for seating tire beads. The original bike polish, Bike Lust's proprietary silicone-based formula includes a biodegradable cleaning agent. Bike lust goes on wet, quickly cleaning light dirt and grime as it polishes, and then dries to a beautiful protective coating. Works on any surface or material in one simple step making your bike look like new and future cleaning easier! Also great for dropper posts, suspension, and for seating tire beads. Bike Lust can be used on all types of materials and finishes including carbon fiber and matte finishes. It's also fantastic on tires to help shed mud and dirt as you ride.

Our unsweetened Hydration Everyday Drink Mix is made with electrolytes and a squeeze of real fruit. It's for those times when you're thirsty and need electrolytes but nothing more. It’s not a one-sip pony. You can also combine it with our other mixes or use multiple servings to customize electrolytes for your individual needs.

Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

BiKASE's Handy Andy holds all iPhones (in and out of cases), Androids, such as Motorola's Bionic and Razor, the Samsung Galaxy and many more phones. It quickly, easily and securely mounts with the neoprene Velcro straps. Simply wrap them around your handlebars, stem, frame top tube, or even your backpack for easy access to your smart phone while riding. No tools are required! This phone pouch makes calling or navigating with a GPS or training app simple. The see-through window allows viewing information while keeping your phone or device protected and lets you easily operate the touch screen and talk, too, with the phone in the case. A removable pad is included for those really thick phones. • Removable straps to use as cycling wallet. • Mounts on stem or top tube • Mounts on backpacks, messenger bags, strollers, grocery cart, etc. • Reflective logo • 2 Way Zipper Pull • Material: 840 denier nylon/TPU cover • 6.75 x 3.5 x 1-inches (fits iPhone 6+ and larger androids) • 100 grams

Retro Mirror Sprintech Single Mirror. Works with all road handlebars by attaching to the bar end using its simple retrobike install. Allows you to see traffic from behind without having to look over your shoulder. Expands your visual field without shifting head or body to see behind you. As reliable as a car's rearview mirror! Placed on the left side of the handlebars, the Sprintech rearview mirror is easy to install. Simply remove the cap from the end of the handlebar, insert the connector plug, and attach the Sprintech rearview mirror. Once installed, simply adjust to the desired position. Available in five colors: Black, White, Red, Yellow, and Blue. Also available in pairs!

A lightweight and efficient telescopic mini pump with T-handle, 120 psi pressure rating and serviceable in-line pressure gauge. CONSTRUCTION • Telescoping, engineering plastic barrel with textured head and T-handle HEAD • CNC-machined alloy Quick-Flip universal connection adapts instantly to Presta, Schrader or Dunlop valves • Forged aluminum TipFlip lock-on thumb lever ADDED BENEFITS • Serviceable in-line pressure gauge • Textured ridges on head and T-handle means no-slip in wet, muddy or sweaty conditions • Mounting bracket and bolts included • Pressure Rating: 120 psi • Weight: 151 grams / 0.33 pounds • Length: 22.2cm / 8.5 inches

High-performance bicycles require precision during setup and adjustment. The Preset Torque Wrench provides secure adjustments while preventing damage to lightweight bars and forks from over-tightening. Product details - Tools are pre-set to 5Nm or 6.8Nm - Check component tightening specifications before using - 4mm and T25 keys are non-removable

The Grid Front Light has four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid Front Lights offer plenty of rechargeable power to keep you visible while out riding. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

- For use with Bontrager CO2 cartridges - Regulator design provides safe, controlled operation - Reusable cartridge insulator keeps hands protected while inflating - Compact and lightweight design is easy to store for any ride - Spring-loaded mechanism regulates airflow for both Presta and Schrader valves

Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware

SECURITY REDEFINED A cutting edge concept in security with a multitude of applications. Z LOK COMBO offers the same ground breaking lightweight, adjustable zip tie design as the original Z LOK but with the added benefits of a larger locking circumference and 3 digit combination mechanism with reset function. The Perfect Café lock The ideal ride companion, Z LOK COMBO is small enough for the jersey pocket, but offers dependable security for that mid-ride coffee stop. Lighter than a spare tube, a looped Z LOK COMBO fits perfectly into a jersey pocket. Multi-use Practicality Once you have a Z LOK COMBO, you’ll be amazed at the multiple uses you find for it. Whether used as the perfect short term security, protection whilst the bike is on a roof rack, a ski lock or to secure luggage and accessories, Z LOK COMBO’s uses are endless. - Reinforced steel core - User resettable 3 digit security code ( no keys required ) - 44cm locking diameter - Ergomomic release button gives super quick locking and unlocking - Metal Lock Body

- 8mm COILED STEEL CABLE - Integrated 4 digit RESETTABLE LOCKING HEAD - EASY-CLICK locking - NEW easy to use reset design - Protective vinyl cover - Combo Safe Program

The KryptoFlex 1004 Double Loop Cable is a 3/8-inch braided steel cable providing increased cut resistance. The double loops are for use with U-locks, disc locks and padlocks. The vinyl coating protects bikes and equipment from scratches. It includes the Hook-n-Loop strap for easy carrying. The KryptoFlex 1004 Looped Cable is 3/8-inch x 4-feet.

For a stable, worry-free ride with any rear wheel-mounted trainer. Product Features - For a stable, worry-free ride with any rear wheel-mounted trainer. - Unique 3-level design lets you select the level of difficulty. - Stack two blocks to simulate climbing workouts. Three different positions to raise your front wheel and simulate hill climbs - 2.1 inches (5.3 cm) - 2.7 inches (6.8 cm) - 3.1 inches (7.9 cm)

Made with recycled materials, this side-entry bottle cage offers easy bottle access on small frames and in tight spaces. SIDE LOADING FOR TIGHT SPACES The Side Load Recycled Water Bottle Cage lets you easily access bottles while you ride. It's built from recycled materials and fits neatly in small spaces, making it the ideal choice for smaller frames, full suspension bikes, and when using a frame bag. Great for mountain and road riding alike. Using recycled materials in this product helps provide second life to unwanted end of life plastics. PRODUCT DETAILS - Made using recycled plastic - Lightweight and durable composite construction - Side-loading design allows for easy bottle access on compact frames - Mount it on the down tube for left-side water bottle access - Mount it on the seat tube for right-side water bottle access - Suitable for road and mountain use

Made with recycled materials, this side-entry bottle cage offers easy bottle access on small frames and in tight spaces. SIDE LOADING FOR TIGHT SPACES The Side Load Recycled Water Bottle Cage lets you easily access bottles while you ride. It's built from recycled materials and fits neatly in small spaces, making it the ideal choice for smaller frames, full suspension bikes, and when using a frame bag. Great for mountain and road riding alike. Using recycled materials in this product helps provide second life to unwanted end of life plastics. PRODUCT DETAILS - Made using recycled plastic - Lightweight and durable composite construction - Side-loading design allows for easy bottle access on compact frames - Mount it on the down tube for right-side water bottle access - Mount it on the seat tube for left-side water bottle access - Suitable for road and mountain use

This wall mounted storage solution screws into the wall and offers adjustable hooked-arms to hold a bike. - Independently adjustable arms - Padded arms to protect bike - Dimensions: 16.25 x 17 x 14.5"

The Bastion 0.6 L's quick release mounting hardware provides convenience and peace of mind by making removal and attachment a breeze. - Dimensions: 10 x 8 x 15 cm - Volume: 0.6 L - Weight: 150 g - Robust 600D Korean Polyester fabric - Ideal for tools, tube, repair kit, mini pump, etc. - LED light mount - Rixen and Kaul KLICKfix Saddle Adapter - Reflective elements - Weather resistant - Limited lifetime warranty

Easy-to-install rear fender for your fat bike. CONSTRUCTION • Virtually unbreakable polypropylene body MOUNTING SYSTEM • Adjustable rubber straps mount to down tube • 100% recyclable • Ships and merchandises as a flat sheet and snaps onto the included seat tube bracket • Hardware included • Weight: 190 grams / 6.7 ounces